Autodome User Commands; Unlocked Commands - Bosch AutoDome Installation Manual

EN

AUTODOME USER COMMANDS

UNLOCKED COMMANDS

Commands Keystrokes
Scan ON/OFF-1-ENTER
AutoPan ON/OFF-2-ENTER
Preset Menu SET-100-ENTER
Preset Tour ON/OFF-8-ENTER
Preset Tour ON/OFF-15-ENTER
Period
Preset Save SET-1-99-ENTER
Preset Call SHOT-1-99-ENTER
Edit Preset Title ON/OFF-62-ENTER
Edit Preset Tour SET/SHOT-900-ENTER Presets can be removed/restored (On/Off) from the Preset tour, via an on-screen menu. Presets can still be
Modify
SET/SHOT-901-999-ENTER
Preset Tour
Alarm Clear/ ON/OFF-65-ENTER
Relay Output
Record A ON/OFF-100-ENTER
Record B ON/OFF-101-ENTER
Continuous ON/OFF-50-ENTER
Playback A
Playback A ON/OFF-51-ENTER
Continuous ON/OFF-52-ENTER
Playback B
Playback B ON/OFF-53-ENTER
Scan+Auto ON/OFF-14-ENTER
Pan Speed
Backlight ON/OFF-20-ENTER
Compensation
View Factory ON-47-ENTER
Settings
Software Version ON-66-ENTER
Night Mode ON/OFF-57-ENTER
Day/Night Menu ON-56-ENTER
AutoTrack ON/OFF-78-ENTER
© 2005 Bosch Security Systems
Description
Camera continuously pans in the last direction that the joystick was moved. Moving the joystick stops the scan.
Camera continuously pans back and forth between limits. Moving the joystick stops the scan.
Permits modification of Preset scenes from an on-screen menu (recommended).
Camera cycles through Preset Scenes. Moving the joystick stops the tour.
On-screen menu changes the length of waiting time between presets.
Stores the current scene and camera settings in memory. Preset 1 is shown when the camera is initialized.
Recalls the scene and camera settings from memory.
Modifies the Preset names. On-screen instructions are provided.
displayed manually.
Presets can individually be removed/restored (On/Off) from the Preset tour.
Example: SET-915-ENTER will clear Preset 15 from the tour. Presets can still be displayed manually.
If an alarm has been activated and the ALARM message is being displayed, it may be cleared by using
OFF-65-ENTER once. When OFF-65 ENTER is pressed again, the relay output will be deactivated.
ON-65-ENTER will activate the relay output regardless of alarm conditions.
Records "A" camera and PTZ controls, that can be played back. Once the sequence is recorded, you must exit
record to play back.
Records "B" camera and PTZ controls, that can be played back. Once the sequence is recorded you must exit
record to play back.
Camera will repeat "A" recorded sequence.
Camera will play the "A" recorded sequence once.
Camera will repeat "B" recorded sequence.
Camera will play the "B" recorded sequence once.
On-screen menu allows the setting of the
AutoPan and AutoScan speeds. Default is 30 degrees/second.
Camera will adjust for a bright background.
Displays the factory default settings.
Briefly displays the camera software versions.
Switches from color to monochrome (Day/Night models only).
On-screen menu changes Night Mode setting (On/Off/Auto; Day/Night only).
Allows the operator to turn tracking On and Off (AutoTrack Option only).
User Manual Commands
Page 39 of 40