Important Safeguards - Bosch AutoDome Installation Manual

EN

Important Safeguards

1. Read, Follow, and Retain Instructions - All safety and
operating instructions should be read and followed before
operating the unit. Retain instructions for future reference.
2. Heed Warnings – Adhere to all warnings on the unit and in
the operating instructions.
3. Attachments - Attachments not recommended by the prod-
uct manufacturer should not be used, as they may cause haz-
ards.
4. Installation Cautions - Do not place this unit on an unsta-
ble stand, tripod, bracket, or mount. The unit may fall, caus-
ing serious injury to a person and serious damage to the
unit. Use only manufacturer-recommended accessories, or
those sold with the product. Mount the unit per the manu-
facturer's instructions. Appliance and cart combination
should be moved with care. Quick stops, excessive force, or
uneven surfaces may cause the appliance and cart combina-
tion to overturn.
5. Cleaning - Unplug the unit from the outlet before cleaning.
Follow any instructions provided with the unit. Generally,
using a damp cloth for cleaning is sufficient. Do not use liq-
uid cleaners or aerosol cleaners.
6. Servicing - Do not attempt to service this unit yourself.
Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified ser-
vice personnel.
7. Damage Requiring Service - Unplug the unit from the
main AC power source and refer servicing to qualified ser-
vice personnel under the following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or an object has fallen into the
unit.
• If the unit has been exposed to water and/or inclement
weather (rain, snow, etc.).
• If the unit does not operate normally, when following the
operating instructions. Adjust only those controls specified
in the operating instructions. Improper adjustment of other
controls may result in damage, and require extensive work
by a qualified technician to restore the unit to normal
operation.
• If the unit has been dropped or the cabinet damaged.
• If the unit exhibits a distinct change in performance, this
indicates that service is needed.
8. Replacement Parts - When replacement parts are required,
the service technician should use replacement parts specified
by the manufacturer, or that have the same characteristics as
the original part. Unauthorized substitutions may result in
fire, electrical shock, or other hazards.
9. Safety Check - Upon completion of servicing or repairs to
the unit, ask the service technician to perform safety checks
to ensure proper operating condition.
© 2005 Bosch Security Systems
Important Safeguards
10. Power Sources - Operate the unit only from the type of
power source indicated on the label. If unsure of the type of
power supply to use, contact your dealer or local power
company.
• For units intended to operate from battery power, refer to
the operating instructions.
• For units intended to operate with External Power
Supplies, use only the recommended approved power
supplies.
• For units intended to operate with a limited power source,
this power source must comply with EN60950.
Substitutions may damage the unit or cause fire or shock.
• For units intended to operate at 24 VAC, normal input
voltage is 24 VAC. Voltage applied to the unit's power
input should not exceed 30 VAC. User-supplied wiring,
from the 24 VAC supply to unit, must be in compliance
with electrical codes (Class 2 power levels). Do not ground
the 24 VAC supply at the terminals or at the unit's power
supply terminals.
11. Coax Grounding - If an outside cable system is connected
to the unit, ensure that the cable system is grounded. U.S.A.
models only--Section 810 of the National Electrical Code,
ANSI/NFPA No.70, provides information regarding proper
grounding of the mount and supporting structure, grounding
of the coax to a discharge unit, size of grounding conductors,
location of discharge unit, connection to grounding elec-
trodes, and requirements for the grounding electrode.
12. Grounding or Polarization - This unit may be equipped
with a polarized alternating current line plug (a plug with
one blade wider than the other). This safety feature allows
the plug to fit into the power outlet in only one way. If
unable to insert the plug fully into the outlet, try reversing
the plug. If the plug still fails to fit, contact an electrician to
arrange replacement of the obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-wire ground-
ing plug (a plug with a third pin, for grounding). This safety
feature allows the plug to fit into a grounding power outlet
only. If unable to insert the plug into the outlet, contact an
electrician to arrange replacement of the obsolete outlet. Do
not defeat the safety purpose of the grounding plug.
13. Lightning - For added protection during a lightning storm,
or when this unit is left unattended and unused for long peri-
ods of time, unplug the unit from the wall outlet and discon-
nect the cable system. This will prevent damage to the unit
due to lightning and power line surges.
Page 2 of 36