Connecting external devices
Connecting external devices
Under all circumstances, please observe the safety notes provided in the
"Important notes", Page 13
any devices to or from your Tablet PC.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thunderstorm.
Never pull at a cable when disconnecting it. Always grasp the plug.
With some devices, such as USB devices, it is not necessary to switch off
the Tablet PC and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with your external device.
Some of the external devices require special drivers (see the operating
system and external device documentation).
Connecting an external monitor
Information on screen resolution can be found in the section
for integrated screen and external screens", Page
Mini Display Port
DisplayPort
The mini Display Port of the Tablet PC can be used to connect a monitor, an LCD
TV or a plasma TV with a corresponding connection.
Some LCD televisions have only two speaker connections and therefore
cannot reproduce Dolby Digital or DTS. In order to reproduce the sound, you
must go into Windows and adjust the sound settings.
► To do this, deactivate the DTS Audio and Dolby Digital settings in the control
panel for the Realtek HDMI Output.
62
chapter before connecting or disconnecting
► Connect the data cable to the
external device.
► Connect the data cable to the mini
Display Port of the Tablet PC.
"Screen resolutions
83.
Fujitsu