Sartorius CH1NE Operating Instructions Manual page 105

Power Supply
24V industrial power supply module*
External rechargeable battery pack, up to 40 h operation,
incl. charger
Connecting cable (25-pin D-SUB) for YRB10Z battery pack (2 m)
Connecting cable with cable gland for YRB10Z battery pack (2 m)
Connecting cable with cable gland for car battery (2 m)
Connecting Cables
Connecting cable with cable gland for YBR02FC bar code scanner
Connecting cable with cable gland 9-pin D-SUB
1
male connector, 6 m )
Connecting cable with cable gland, 9-pin D-SUB
1
female connector, 6 m )
Connecting cable with cable gland, 25-pin D-SUB
1
female connector, 1.5 m )
Connecting cable with cable gland, 12-pin round
1
male connector, 6 m )
Connecting cable with cable gland, 12-pin round
1
female connector, 1.5 m )
Cable for YDA01C-20MA power interface,
with open cable ends e.g., 5 + = 5 m*
Cable for connecting a PC; 25-contact D-Sub, approx. 1.5 m
Cable for connecting a PC; 9-contact D-Sub, approx. 1.5 m
Cable for connecting an isi terminal or QA/QC
or FB/FC scale; 25-pin D-Sub to 12-pin round connector
Cable for connecting a scale with 25-contact D-Sub female
connector (25-pin D-Sub male connectors on both ends)
Cable for connecting an IS weighing platform; 25-pin D-Sub male YCC01.03CISLM3
connector to 25-contact D-Sub female connector, 3 m
* not for use in legal metrology
1
) for stainless steel Combics models only (CW1S, CW1NS, CW2S)
Options
Set of stainless steel floor fasteners (2 fastening plates,
4 special dowel screws), stainless steel
Column for bench, painted, for attaching indicator
Adjustable height
Column for bench, stainless steel, for attaching indicator
Adjustable height
Set of castors (2 guide castors, 2 lockable castors) for bench
Plate for bench column, for attaching indicator and printer
Retainer for bar code scanner, for attachment to bench column
Connecting an IS Weighing Platform to a Combics 2 Indicator
You can connect an IS weighing platform as WP2.
Characteristics:
– IS weighing platforms process weighing data independently of the indicator
– IS platforms can be internally adjusted
– ...-0CE models have a separate approval number, on a tag affixed to the cable
– Please observe the conditions described in the instruction
manual for the platform connected
YAS02CI
YRB10Z
YCC02-RB01
YCC02-RB02
YCC02-CB02
1
) YCC02-BR02
YCC02-D09M6
YCC02-D09F6
YCC02-D25F6
YCC02-R12M6
YCC02-R12F6
6906926
7358312
7358314
YCC01-02ISM3
YCCD1-01M3
YFP01CWS
YDH01WTCWP
YDH01WTCWS
YRO01WTCW
YPP01CWS
YBH01CWS
105