Set Zero Dissolved Oxygen Calibration - Thermo Scientific Orion Star A213 Reference Manual

Set Zero Dissolved Oxygen Calibration

Note: In most calibration screens, press f1 (esc) to return to the measurement mode without saving the calibration.
2. Press
3. Rinse the RDO optical DO probe or polarographic DO probe and any other electrodes in use with distilled
and standard to reach equilibrium.
stable, the meter will display Reading is stable. Accept Auto Calibration Value and 0.00.
calibration log and a printer or computer. The meter will proceed to the measurement mode.
18
or to highlight Set Zero and press f3 (select).
f3 (cal done) to export the data to the calibration log or press f2 (print) to export the data to the
Thermo Scientific Orion Star A213 Benchtop and Star A223 and Star A323 Portable RDO/DO Meter Reference Guide
f1 (cal).
f3 (start).