1. Press
on or off or press and hold
2. Press
3. The f1, f2, and f3
above each key on the display. For example, press f1 in the measurement mode to start a calibration.
continuous measurement mode.
Meter Maintenance
meter using the proper cleaning procedure for the type of spill.
8
to power the meter on. When the meter is on, press and quickly release
for about three seconds to power the meter off.
to exit any meter function and return to the measurement mode.
,
,
or
to access the calibration log and data log. Orion Star A213 benchtop meters only.
Thermo Scientific Orion Star A213 Benchtop and Star A223 and Star A323 Portable RDO/DO Meter Reference Guide
to turn the backlight
Orion Star A213 benchtop meters only.