Canon iPF9000S Troubleshooting Manual page 46

Panel display
Code
(last 4
Large LCD
digits)
2E08 Wrong paper size.
Check paper size
setting on computer.
Online: Print
Stop: Stop Printing
Wrong paper size.
Check paper size
setting in driver.
Online: Print
Stop: Stop Printing
PaprWidth Mismatch
2E09 Insufficient paper
for job
2E0A Roll printing is
selected, but sheets
are loaded.
Press Load/Eject
and
remove the sheets.
Roll printing is
selected, but manual
paper is loaded.
Roll printing is
selected, but sheets
are loaded.
Press OK,
remove the sheets,
and load a roll.
Roll printing is
selected, but sheets
are loaded.
OK:Eject Sheets
Stop:Stop Printing
Roll printing is
selected, but sheets
are loaded.
Troubleshooting Guide
Small LCD Small
1 LCD 2
PaprSiz Loaded
Mismatch Papr Diff
Prnt:Pres From
sOnline Spfd
Size
Driver: Loaded
Chk Papr Papr Diff
Size From
Setting Spfd
Size
Roll Paper
Paper Level
Please Low
Replace Replace
Paper
Sheets Roll
Loaded Selected
Press ↓ Load
To Eject Roll
Explanation/Detection sequence
Paper mismatch (size) (roll paper)
The width of data and that of the actually
loaded paper do not match.
Short on roll paper
All of the following conditions have been met
at the start of printing:
・[ON] has been selected for [Remaining Roll
Paper Detection].
・Among the paper size settings coded in the
print data, the paper length exceeds the
remaining length of roll paper.
Paper mismatch (roll paper)
Print data having a roll paper print
specification has been received at the
completion of manual feed paper pickup.
2-34
Remedial Action
(★: Reference fault
isolation procedure
or tool)
Check the paper
that is actually
loaded on the
printer and the
paper size setting
of the driver.
Go to ★2010
(P3-12).
Replace the roll
paper.
Check the paper
that is actually
loaded on the
paper and the
paper feed
setting of the
driver.