Canon iPF9000S Troubleshooting Manual page 104

Ipf5000, ipf700, ipf8000, ipf800, ipf650/750 series
Hide thumbs Also See for iPF9000S:
Table of Contents

Advertisement

Bands
Any color
(blotches)
(including black
and white)
Troubleshooting Guide
Horizontal
Band blotches
Paper overlapping/Paper taken up before
drying (non-uniform fusing)
In part, horizontal
Difference in paper feed between the LF
Rear end, horizontal
roller and spur
For cut media on the
iPF5000 Series only
Vertical
Cockling
Dented paper or disordered
impact/non-uniform drying caused by
suction
Non-uniform carriage scanning
Dented paper caused by the pinch roller
nip
Carriage stops in a recovery
operation (printing on long sheets)
Carriage stops waiting for data to
be transferred
Wavy paper caused by ink
Explanatory drawing 3
Explanatory drawing 2
3-30
T16
Perform band adjustment
Do not allow paper to overlap until it
dries
Do not use a media take-up unit
Print in an upper mode
Check the specifications of the PC
and the network
Correct trailing end feeding/print on
roll media
If the spur is deformed, replace
Print in an upper mode or change
paper
Reduce suction force/change paper
2F26
Faulty carriage encoder
Change paper
Cut the leading end

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents