Model Removal - 3D Printing Systems UP Mini User Manual

Model info: 30×30×30mm layer thickne Model info: 30×30×30mm layer thickness: 0.25mm
The easiest way to calculate how much material will be used for your model is The easiest way to calculate how much material will be used for your model is The easiest way to calculate how much material will be used for your model is
to use the "Print Preview" option under the "3D Print" menu. This will tell you to use the "Print Preview" option under the "3D Print" menu. This will tell you to use the "Print Preview" option under the "3D Print" menu. This will tell you
the total weight of material used, including the raft and any support material. the total weight of materia
The price as 6/9/12 for ABS plastic from The price as 6/9/12 for ABS plastic from
AU$59 per 1KG working out to be 0.059cents per gram. AU$59 per 1KG working out to be

5. Model Removal

5. Model Removal
1. When the model ha
and platform stop heat and platform stop heating.
2. Slide to remove the Slide to remove the Perfboard from the printer platform.
3. Gently slide the spatula under the model and slowly wiggle it ba Gently slide the spatula under the model and slowly wiggle it back and Gently slide the spatula under the model and slowly wiggle it ba
forth to pry loose the model. Remember to use gloves as the platform and forth to pry loose the model. Remember to u
model may still be hot. model may still be hot
UP Mini 3D Printer User Manual 3D Printer User Manual
$2.02 $2.02 71cents
l used, including the raft and any support material.
has finished printing, the printer will beep, and the
3. Operation
mm
55cents 50cents
www.3DPrintingSystems.com www.3DPrintingSystems.com
printer will beep, and the nozzle
as the platform and
Operation
was
36