3D Printing Systems UP Mini User Manual page 24

For example: Rotate the model around Y axis by 30 : Rotate the model around Y axis by 30
Procedure: 1. Click "Rotate"; 2.
Note: positive numbers rotate counterclockwise and negative numbers rotate positive numbers rotate counterclockwise and negative numbers rotate positive numbers rotate counterclockwise and negative numbers rotate
clockwise.
Scaling the model: Click "Scale"
box, and then either scale the model uniformly by clicking the scale either scale the model uniformly by clicking the scale button either scale the model uniformly by clicking the scale
again, or choose the axis choose the axis around which you want to scale if you only want to
scale in one direction.
Example1: Scale up the model
Procedures: 1. Click "Scale"; 2. Input Procedures: 1. Click "Scale"; 2. Input 2.0 in the text box; 3. Click "Scale" again.
Example2: Scale up the model
Procedures: 1. Click "Scale"; 2. Input 1.2 in the text box; 3. Click "Z axis" Procedures: 1. Click "Scale"; 2. Input 1.2 in the
UP Mini 3D Printer User Manual 3D Printer User Manual
"Rotate"; 2. Input 30 in the text box；3. Click "Y axis"
Click "Scale", choose or input a scaling factor
around which you want to scale if you only want to
the model uniformly by 2.0 times.
the model by 1.2 times along the Z axis only.
3. Operation Operation
o
.
Click "Y axis".
scaling factor in the text
; 3. Click "Scale" again.
.
3. Click "Z axis"
24