3D Printing Systems UP Mini User Manual page 20

Hide thumbs Also See for UP Mini:

Table of Contents

unload all models (if you have more than one file open and want to remove all

s (if you have more than one file open and want to remove all

of them).

Saving the model: Choose the model, then

UP3 format and its size is 12%~18% of the original STL

convenient format for users to

for users to archive or transfer files.

Note on STL files: For a model to print correctly,

need to have their normal facing outwards. The U

need to have their normal facing outwards. The UP software uses model

colour Red to indicate a

software when opening a model is a light grey/pink colour. If the normals are

software when opening a model is a light grey/pink colour. If the normal

facing the wrong way, then the model is coloured in red.

acing the wrong way, then the model is coloured in red.

Fixing STL Files: The Up software has an option that attempts to fix models

with bad surfaces. Under the "Edit" menu you will see a "Fix" option. Select the

model with inverted surfaces, and click the "Fix" option to try and fix it.

model with inverted surfaces, and click t

UP Mini 3D Printer User Manual

3D Printer User Manual

hoose the model, then click "Save". The file is

size is 12%~18% of the original STL file

For a model to print correctly, all the faces of the models

a problem with a model. The default colour used by the

The Up software has an option that attempts to fix models

The file is saved in

all the faces of the models

software uses model

model. The default colour used by the

he "Fix" option to try and fix it.

3. Operation

Operation

file. This is a

Table of Contents

Need help?

Do you have a question about the UP Mini and is the answer not in the manual?