3D Printing Systems UP Mini User Manual page 41

3. Operation Operation
First, print the supplied Calibration model on your printer. The calibration file is printer. The calibration file is
in C:\Program Files\UP\ \Example.
After the calibration model is printed, measure the X1 and X2 length After the calibration model is printed, measure the X1 and X2 length After the calibration model is printed, measure the X1 and X2 length, as shown
in the pictures below.
Open the "Calibrate" box Open the "Calibrate" box form the "3D Print" menu and enter the measured X1 form the "3D Print" menu and enter the measured X1
and X2 values into the appropriate boxes. and X2 values into the appropriate boxes.
UP Mini 3D Printer User Manual 3D Printer User Manual 41