Table of Contents
Advertisement
NOTE: When more than one model is
When more than one model is open, the gap between each
should be kept to at least
Or if you want the models to be closer, under the "Edit" menu, do a
Or if you want the models to be closer, under the "Edit" menu, do a
Or if you want the models to be closer, under the "Edit" menu, do a
"Merge" which combines multiple separate models into one model.
"Merge" which combines multiple separate models into one model.
"Merge" which combines multiple separate models into one model.
3.3.4 Other Maintenance Options
Other Maintenance Options
Click "Maintain" on the "3D Print" menu, and the following dialog box pops up:
Click "Maintain" on the "3D Print" menu, and the following dialog box pops up:
Click "Maintain" on the "3D Print" menu, and the following dialog box pops up:
Extrude: Squeezes material
nozzle is heated. When the temperature is high enough
When the temperature is high enough (260° C)
is squeezed out of the nozzle
of the nozzle. The system beeps before material starts
extruding, and it beeps again when finish
UP Mini 3D Printer User Manual
3D Printer User Manual
pt to at least 12mm to prevent the models sticking together
(Windows version)
(Mac version)
material out of the nozzle. Click on this bu
again when finished. When changing the material
3. Operation
, the gap between each model
the models sticking together.
. Click on this button, and the
before material starts
. When changing the material (See
Operation
C), the material
26
Advertisement
Table of Contents
Need help?
Do you have a question about the UP Mini and is the answer not in the manual?