Table of Contents
Advertisement
4. Install the latest UP! s
5. Unplug the USB cable, then plug again. Windows will find a new device.
5. Unplug the USB cable, then plug again. Windows will find a new device.
5. Unplug the USB cable, then plug again. Windows will find a new device.
Manually select driver folder (Default is C:\Program files\
Manually select driver folder
C:\Program files(X86)\UP
6. There should now be a new driver section in the device manager as shown
6. There should now be a new d
below:
UP Mini 3D Printer User Manual
3D Printer User Manual
software.
UP\Driver);
river section in the device manager as shown
4. Troubleshooting
4. Troubleshooting
\UP\Driver or
48
Advertisement
Table of Contents
Need help?
Do you have a question about the UP Mini and is the answer not in the manual?