3D Printing Systems UP Mini User Manual page 27

section 6), this function is used to deliver unction is used to deliver the new material to the nozzle
function can also be used to be used to test whether the nozzle is working correctly
Withdraw: Withdraws the material
runs out, or the nozzle needs to be chan or the nozzle needs to be changed, click this button. When the nozzle
is up to temperature (2 up to temperature (260° C) and beeps, gently pull out the material. If the
material gets stuck, pull material gets stuck, pull it out it by hand.
New Spool: This is used so the printer can keep track of how much material This is used so the printer can keep track of how much material This is used so the printer can keep track of how much material
has been used, and warn you if you don't have enough material left to print
your model. Click this button and enter the value of how many grams of your model. Click this button and enter the value of how many grams of your model. Click this button and enter the value of how many grams of
material you have on the current spool. If it is a new spool, the quantity should material you have on the current spool. If it is a new spool, the quantity should material you have on the current spool. If it is a new spool, the quantity should
be set to 700 grams. You can also specify whe
with is ABS or PLA.
TIP: An empty spool weighs about 280 grams so, if you are installing a partially An empty spool weighs about 280 grams so, if you are installing a partially An empty spool weighs about 280 grams so, if you are installing a partially
used spool, weigh it, and subtract 280 grams from the weight. This gives used spool, weigh it, and subtract 280 grams from the weight. This gives used spool, weigh it, and subtract 280 grams from the weight. This gives
you the value to enter into the material text box. you the value to enter into the material tex
Status: Displays the temperature of the temperature of the nozzle and platform.
Stop All: Stops heating and all the movement of the printer. Once heating and all the movement of the printer. Once heating and all the movement of the printer. Once you click this
button, the current model being printed current model being printed is cancelled. You CANNOT
print job once the printer has print job once the printer has been stopped. After you use the "Stop All" option,
you will need to re-initialize initialize the printer.
Pause Print: This button allows you to pause a print in mid This button allows you to pause a print in mid-progress, but yu
can then resume the print job where it left off. This is very useful if you, for can then resume the print job where it left off. This is very useful if you, for can then resume the print job where it left off. This is very useful if you, for
example, want to change the material colour mid ample, want to change the material colour mid-print. Another popular use for
pausing a job mid-print is to allow fasteners to be inserted into printed cavities print is to allow fasteners to be inserted into printed cavities print is to allow fasteners to be inserted into printed cavities
and then printed over to lock the fastener into place. and then printed over to lock the fastener into place.
UP Mini 3D Printer User Manual 3D Printer User Manual
the material from the extrusion head. When the material
ged, click this button. When the nozzle
warn you if you don't have enough material left to print warn you if you don't have enough material left to print
You can also specify whether the material you are printing
3. Operation
the new material to the nozzle. This
. When the material
pull out the material. If the
ther the material you are printing
CANNOT resume a
After you use the "Stop All" option,
print. Another popular use for
Operation
correctly.
progress, but yu
27