Table of Contents
Advertisement
3.6 Security Configuration
For security reasons, you are highly recommended to use EDG's security
features. The EDG configuration utility provides security functions for
the network structure.
Only configure the allowed IP
The system will auto detect the IP address for the currently connected
computer. If you enable this function, only your current host computer
can access this EDG Device.
*If you use Dynamic IP Assignment by the DHCP Server, we suggest
that this function is not enabled.
Allow any IP to access
If you enable this function, any IP address can access your device and
there is no access restriction.
Specified IP can access EDG device
You can assign a specific IP address that have have authority to access
the EDG device. Assign the IP address and click on "Add" to add a speci-
fied IP or choose the IP address list below and click on "Delete" to
remove the IP from the access list.
33
Chapter 3
Advertisement
Table of Contents
