Security; Figure 4.6 Wireless Settings > Security - Advantech EKI-136-MB-BE Series User Manual

Item
Disassociate Timer
Ping target
Ping Waittime
Ping Loss Counter
Advanced Wireless Setting
Transmission Power
Short Guard Interval
Apply
4.5.3

Security

To access this page, click Wireless Settings > Security.
The following table describes the items in the previous figure.
Item
Security Policy
Security Mode
Apply
EKI-136x-MB-BE Series User Manual
Description
The set value in seconds defining the disassociation period. Once
the condition is met, the defined watchdog action is triggered.
Enter the IP address to ping when Watchdog Ping is selected.
Enter a value in seconds to designate the interval between pings.
Enter a value to activate the Watchdog function when the
configuraed number of ping failure time is reached.
Click the drop-down menu to set the transmission power of the
WiFi. By default the AP transmits at full power: Full, Half or
Quarter.
Click the drop-down menu to enable/disable the short guard
interval. In 802.11 operation, the guard interval is 800ns. The short
guard interval time is 400ns to allow for an increased throughput.
Click Apply to save the values and update the screen.
Figure 4.6 Wireless Settings > Security
Description
Click the drop-down menu to select the encryption when
communication. Available options: None, WEP, WPA-Personal or
WPA/WPA2-Enterprise. If data encryption is enabled, the key is
required and only sharing the same key with other wireless
devices can the communication be established.
Click Apply to save the values and update the screen.
42