Table of Contents
Advertisement
SCREEN
If there is no input from the console for the amount of time set with this function, the
BLANKER
screen is blanked. Key in a value from 1–30 minutes, then press [Enter]. The default
setting of 0 disables this function.
HOTKEY
Enables / disables the hotkey command function in case a conflict with programs
COMMAND
running on the computers occurs.
MODE
HOTKEY
Sets the keyboard shortcut for invoking Hotkey Mode. Choices are: NUM LOCK + -
(minus) (default), and CTRL + F12.
OSD
Sets the language used in the OSD. Choices are: English (default), German, Japa-
LANGUAGE
nese, Simplified Chinese and Traditional Chinese.
F4: ADM
F4 is an administrator only function. It allows the administrator to configure and control the overall
operation of the OSD. To change a setting double-click it, or use the up and down arrow keys to move
the highlight bar to it then press [Enter]. After you select an item, a submenu with further choices to select
from appears. Double-click an item or move the highlight bar to it then press [Enter]. An icon appears
before the selected item so that you know which one it is. The settings are explained in the following table:
40
Hide quick links:
Advertisement
Table of Contents
