IOGear GCS1716 Installation Manual page 14

No Components
1 KVM Ports
2 Grounding
Terminal
3 Cable Tie Slot
4 Power Jack
5 Console Port
The cables that link to the computers plug in here.
Note: The shape of these 15-pin connectors has been specifically modified
so that only custom KVM cables designed to work with this switch can be
plugged in. Do NOT attempt to use ordinary 15-pin VGA connector cables to
link these ports to the computers.
The grounding wire used to ground the GCS1716 attaches here.
If you want to use a cable tie to gather the cables together, you can run it
through this slot to attach it to the unit.
The power adapter cable plugs in here.
The custom console cable set that is provided to attach the console monitor,
keyboard, and mouse plugs in here.
Description
14