IOGear GCS1716 Installation Manual page 33

OSD Main Screen
When you invoke the OSD, a screen similar to the one below appears:
Notes:
1.
The diagram depicts the administrator's main screen. The user main screen does not show the F4 and F6 functions,
since these are reserved for the administrator and can't be accessed by users.
2.
The OSD always starts in list view, with the highlight bar at the same position it was in the last time it was closed.
3.
Only the ports that have been set accessible by the administrator for the current logged in user are visible
4.
If the port list is collapsed, click on a switch number, or move the highlight bar to it then press the right arrow key to
expand the list. Similarly, to collapse a switch's port list, click on the switch number, or move the highlight bar to it then
press the left arrow key to collapse the list.
33