IOGear GCS1716 Installation Manual page 39

PORT ID DISPLAY Determines how long a port ID displays on the monitor after a port change has taken place. The
DURATION choices are: 3 Seconds (default) and Always Off.
PORT ID DISPLAY Selects how the port ID is displayed: the port number plus the port name (PORT NUMBER +
MODE PORT NAME) (default); the port number alone (PORT NUMBER); or the port name alone (PORT
NAME).
SCAN DURATION Determines how long the focus dwells on each port as it cycles through the selected ports in
Auto Scan mode (see F7 SCAN, page 49). Key in a value from 1–255 seconds, then press [Enter].
Default is 5 seconds; a setting of 0 disables the SCAN function.
SCAN–SKIP MODE Selects which computers will be accessed under skip mode (see F5 SKP, page 47) and Auto
Scan mode Choices are:
ALL - All the ports which have been set accessible
QUICK VIEW - Only those ports which have been set accessible and have been selected as quick
view ports
POWERED ON - Only those ports which have been set accessible and are powered on
QUICK VIEW + POWERED ON - Only those ports which have been set accessible and have been
selected as quick view ports and are powered on. The default is ALL.
Note: The quick view choices only show up on the administrator's screen, since only he has Quick
View setting rights
39