Basic Operation - IOGear GCS1716 Installation Manual

Basic Operation

Hot Plugging
The GCS1716 supports hot plugging – components can be removed and added back into the installation
by unplugging their cables from the ports without the need to shut the unit down. However, in order for
hot plugging to work properly, the procedures described below must be followed:
Hot Plugging KVM Ports
In order for the OSD menu to correspond to the KVM port changes, you must manually reconfigure the
OSD to reflect the new port information.
Note: If the computer's operating system does not support hot plugging, this function may not work
properly.
28