IOGear GCS1716 Installation Manual page 38

F3: SET
This function allows the administrator and each user to set up his own working environment. A separate
profile for each is stored by the OSD and is activated according to the username that was provided during
login.
To change a setting:
1. Double-click it, or move the highlight bar to it, then press [Enter].
2. After you select an item, a submenu with further choices appears. To make a selection, either double-
click it or move the highlight bar to it, then press [Enter]. An icon appears before the selected choice to
indicate which one it is. The settings are explained in the following table:
Setting
Function
OSD HOTKEY Selects which hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the [Ctrl] key combination may conflict with programs running on the computers, the default
is the [Scroll Lock] combination.
PORT ID DISPLAY Allows each user to customize the position where the port ID appears on the screen. The default is
POSITION the upper left corner, but users can choose to have it appear anywhere on the screen.
Use the mouse or the arrow keys plus Pg Up, Pg Dn, Home, End, and 5 (on the numeric keypad
with Num Lock off), to position the port ID display, then double-click or press [Enter] to lock the
position and return to the Set submenu.
38