Page 10
Operation
3
Operation
3.1 Dual-Tap Video Output
The TM-6710CL uses a dual-tap output for its fast frame readout. At the same horizontal clock cycle,
line 1 and all odd lines go to channel A, and line 2 and all even lines go to channel B. Vertical shift
registers move twice per horizontal blanking period. Lines are grouped in twos, so that 1 and 2, and 3
and 4, and so on, are output from channel A and B simultaneously.
Channel B
(Even)
Channel A
(Odd)
3.2 Rear Panel
Rear Panel Layout (TM-6710)
FIGURE 8.
Analog video output
connector
Up/down switch
(mode control)
TM-6710/6710CL High-Speed Progressive Scanning CCD Camera
V shift registers
5
4
3
2
Lines
1
CCD output
VIDEO
Photodiode
Horizontal shift registers
Shutter
SHUTTER
0
5
UP
0
POWER
8
DWN
MODE
DIGITAL
12-Pin Power
Mode selection switch
51-pin digital output connector