Digital Output Cable (Lvds/Rs-422 Version); Figure 5. Digital Output Cable 30Dg-02; Figure 6. Pin-Out Configuration For Digital Output Cable - JAI TM-1020 Operation Manual

2.2.5 Digital Output Cable (LVDS/RS-422 version)

Digital Output Cable 30DG-02
FIGURE 5.
Female
1
17
31
16
25.0mm
1.00 in
The TM-1020 series camera uses the cable 30DG-02 from JAI, Inc. as a digital output cable. This cable
has a 31-pin AirBorn connector on the camera end and a 37-pin D-sub male connector on the other end.
Contact your JAI, Inc. representative regarding availability of interface cables for specific frame
grabber models. Pin-out configuration for the digital cable is shown below.
Pin-out Configuration for Digital Output Cable
FIGURE 6.
FROM 31 PIN CONN TO 37 PIN CONN
PIN 1 PIN 1
PIN 2 PIN 2
PIN 3 PIN 3
PIN 4 GND PIN 16 GND
PIN 5 HD
PIN 6 INTEG
PIN 7 PULSE
PIN 8 PIN 8
PIN 9 PIN 9
PIN 10 PIN 10
PIN 11 PIN 11
PIN 12 PIN 12
PIN 13 PIN 13
PIN 14 PIN 14
PIN 15 PIN 15
PIN 16 NC
PIN 17 PIN 20
PIN 18 PIN 21
PIN 19 PIN 22
PIN 20 PIN 17
TM-1020 Series Progressive Scan Shutter Cameras
78.74 in (2 meters)
WIRE COLOR FROM 31 PIN CONN)
OR 1RED PIN 21 VD
GRY 1RED PIN 22 EN/INTEG
WHT 1RED PIN 23 GND
YLW 1RED PIN 24
PINK 1RED PIN 25
OR 2RED PIN 26
GRY 2RED PIN 27
WHT 2RED PIN 28
YLW 2RED PIN 29
PINK 2RED PIN 30
OR 3RED PIN 31
GRY 3RED
WHT 3RED
YEL 3RED
PINK 3RED
OR 1BLU
GRY 1BLU
WHT 1BLU
YEL 1BLU
Male
20
37
TO 37 PIN CONN WIRE COLOR
PIN 1BLU
OR 2BLU
PIN 23 GND GRY 2BLU
PIN 27 WHT 2BLU
PIN 28 YLW 2BLU
PIN 29 PINK 2BLU
PIN 30 OR 3BLU
PIN 31 GRY 3BLU
PIN 32 WHT 3BLU
PIN 33 YLW 3BLU
PIN 34 PINK 3BLU
PIN 35 GND SHIELD
N/C
PINS 4, 5, 6, 7
18,19, 24, 25,26,
36, AND 37
Installation
Page 11
1
19