Control Tab
Audio Settings Page
The
output volume, and mix-point adjustments including level control and mute/unmute.
Access the
control page.
Figure 72.
Change the Input Gain and Attenuation
Users can set each input's level of audio gain or attenuation (-18 dB to +80 dB) from the
audio settings page. Audio levels can be adjusted so there are no noticeable volume
differences between sources.
Change an input audio level setting as follows:
1.
2.
3.
4.
page provides a way to set the input audio gain and attenuation,
Audio Settings
page (figure 72) by clicking the
Audio Settings
Video and Audio Settings Page
Next to the desired input number, click the input level drop box. A drop-down
scroll box appears (right).
Click and drag the slider or click the scroll up
button until the desired audio level is visible.
Alternately the + and - boxes increment the level up or down one step.
Click the desired gain or attenuation value. The range is -18 to +80 dBu.
Repeat steps 1-3 for each input.
link on the
Audio Settings
button or scroll down
DMP 64 • HTML Operation
136