Extron electronics DMP 64 User Manual page 98

Gain Blocks
To access a gain, trim or volume control to view a setting, make a change, or observe a live
audio meter (input gain and output volume blocks only), double-click the gain block icon
(figure 47). This action opens a dialog box that contains the fader for that control.
Double-click a gain,
trim or volume control.
A dialog box opens,
containing the
full fader control.
NOTE: In Emulate mode (the
startup mode), the meter
is not operational.
Figure 47. Accessing a Typical Gain Control Dialog Box
Processor Blocks
Each processor block represents a menu of one or more processors that can be inserted
into the audio stream. For blocks that provide more than one processor, only one can
be selected. Each block can be inserted by a double-click or
selecting the desired processor (figure 48). Once a block is inserted, the selected processor
is displayed in the block and the block changes color. Processor blocks default to
bypassed. To have them default to "not bypassed", see
Double-click the
processor block.
Click to select
the desired processor.
-or-
Right-click the
processor block. Click insert.
Figure 48. Selecting a Processor Block
right-click >Insert
Tools
The selected processor is displayed in the block.
To change processor variables, double-click the
block again, opening a separate window.
Click to select
the desired processor.
DMP 64 • Software Control
then
earlier in this chapter.
92