Dsp Configurator Windows Menus; Keyboard Navigation - Extron electronics DMP 64 User Manual

DSP Configurator Windows menus

Keyboard Navigation

The DSP Configurator program is fully navigable using the computer keyboard. Some
keyboard navigation behavior matches Windows standards, while other behaviors are
specific to the DSP Configurator program.
When the program is started, the cursor focus is in the mic/line input gain block.( a on
figure 62). The input 1 gain block is highlighted green [
pressed, the cursor focus toggles to the next area outlined by red boxes in figure 62.
At any time the navigation arrows may be used to move one block right, left, up or down
with no boundaries.
NOTE: The callout numbers for figure 60 are not the same as figure 43.
Figure 60.
Standard Windows Navigation
The keyboard keys navigate and function as follows:
•
a
c
DSP Configurator Program Window
Tab key —
Sequentially jump among major segments of the DSP Configurator program. From
the audio input chains ( a ), sequential jumps are in the following order:
Main mix-points
b
Virtual return signal path
c
Virtual return mix-points
d
Output signal chain
e
Mode (toggles to Live, then emulate)
f
Presets (Down arrow can select presets)
g
]. When the tab button is
g e
d
DMP 64 • Software Control
f
b
117