Figure B-10 Fiber Cable Engineering Label Content; Figure B-11 Coaxial Cable Engineering Label - Zte ZXR10 T8000 Hardware Installation Manual

Figure B-10 Fiber Cable Engineering Label Content

The two areas on the fiber cable engineering label are L and R, which are described below:
l
When the label is pasted on the fiber cable on the ZXR10 equipment side, the content
in Area R should be the Cabinet Row ID and Line ID of the opposite-end optical
interface equipment, number of the cabinet tier where the fiber is located and fiber
cable serial number. The content in Area L should be the Row ID and Line ID of the
local-end (ZXR10) optical interface equipment, number of the equipment tier where
the fiber is located and fiber cable serial number.
l
When the label is intended for the optical interface equipment on the carrier side, label
content should inversely correspond to the label content on the ZXR10 equipment
side.
B.3.3.3 Coaxial Cable Label
The engineering label for coaxial cable is shown in

Figure B-11 Coaxial Cable Engineering Label

Label content is described in
SJ-20110901170352-005|2011-10-15 (R2.0)
Figure B-12.
B-11
Appendix B Label Specification
Figure B-11.
ZTE Proprietary and Confidential