Figure 2-2 Data Plane Cascade Fibers - Zte ZXR10 T8000 Hardware Installation Manual

Chapter 2 Installation of Cluster in 1+4 Mode
1. Insert the fiber connector into an interface of the related board.
2. Tighten the screw on the fiber connector clockwise.
3. Stick labels on both sides of the fiber to describe the information about the fiber.
4. Use cable straps to organize and bind the fibers in compliance with related
specifications.
The data plane cascade fibers of the ZXR10 T8000 cluster system are as shown in Figure
2-2.

Figure 2-2 Data Plane Cascade Fibers

Figure 2-3 shows some rows of fibers connected in the cluster installation.
2-3
SJ-20110901170352-005|2011-10-15 (R2.0) ZTE Proprietary and Confidential