Table B-5 Fiber Pigtail Interface Id Forma; Table B-6 Odf Fiber Pigtail Interface Id Format - Zte ZXR10 T8000 Hardware Installation Manual

Table B-5 Fiber Pigtail Interface ID Forma

ID Meaning
XA-B-C-D X: System name
A: Equipment ID
B: Subrack ID (number)
C: Slot ID (number)
D: Port ID (number and letter)
ID format requirements of the fiber pigtail interfaces on the ODF frame side are shown in
Table B-6.

Table B-6 ODF Fiber Pigtail Interface ID Format

ID Meaning
XA-B-C-D X: System name
A: System ID
B: Unit module ID
C: Row/Line ID
D: Port ID
B.2.4.2 Label Example (Fiber)
The example is to number a fiber connecting from Optical Interface 3 located at Slot 01,
Subrack 1, Cabinet IP01 to Optical Interface 7 located at Line 2 of Module 3, ODF 3. It is
recommended to arrange label content in the way as described in
SJ-20110901170352-005|2011-10-15 (R2.0)
Specification
X: The same with the system name
in contract ID
A: IDs of ZTE equipment and
cabinets in one site should be
deployed uniformly and each ID
should be unique.
The subracks from top to bottom
are numbered in ascending order.
For example, 1–4 for Subrack 1 to
Subrack 4.
Consistent with the Slot ID on the
subrack
Consistent with the port ID on the
board or interface panel
Specification
X: ODF
A: ODF fram ID
ID of the ODF unit module where the
interface is located
Add "R" (ROW) at the end of Row ID;
add "L" (LINE) at the end of Line ID
Optical interface ID and
transmit/receive relationship
B-7
Appendix B Label Specification
Example
IP01
1
The subrack slot ID of
line interface board: 5
Port 3 on Line interface
board
Example
ODF 03
3
2R/2L
7R
Figure B-4.
ZTE Proprietary and Confidential