Figure B-8 Power Cable Label Paste Position; Figure B-9 Fiber Cable Engineering Label - Zte ZXR10 T8000 Hardware Installation Manual

ZXR10 T8000 Hardware Installation Guide (Cluster)

Figure B-8 Power Cable Label Paste Position

The two areas on the flag-shaped power cable label are L and R, which are described
below.
l L: Location of the near-end equipment, which is the location of the local equipment to
which the power cable is connected.
l
R: Location of the far-end equipment, which is the location of the opposite equipment
to which the power cable is connected. If the equipment at opposite end is power
distribution board, it is required to indicate the board and mark the nature of the power
cable, for example, distribution GND.
Caution!
Contents of the two labels on the power cable ends should inversely correspond. The
content in Area L on one label should be consistent with the content in Area R on the other
label.
B.3.3.2 Fiber Cable Label
The engineering label for fiber cable is shown in

Figure B-9 Fiber Cable Engineering Label

Label content is described in
SJ-20110901170352-005|2011-10-15 (R2.0)
Figure
Figure B-10.
B-10
B-9.
ZTE Proprietary and Confidential