Table of Contents
Advertisement
18
en | Connecting cables in housing
6.5
Camera connections
Analog camera kit
Connect the coax cable (with BNC connector) directly to the Video connector on the back of
the camera.
If required, connect audio and alarm cables directly to back of camera.
IP camera kit
If required, connect the Cat5 / Cat6 cable to the ETH POE connector on the back of the
camera.
If required, connect audio and alarm cables directly to back of camera.
Use the composite video connector (CVBS) on the camera to connect an analog monitor for
setting up the camera or as a permanent analog output for viewing or recording:
–
–
2014.11 | 1.0 | F.01U.309.609
To connect a monitor for set-up, use the optional 3 m cable (NBN-MCSMB-30M) to
connect directly to the CVBS connector of a monitor.
For a permanent analog output, use the optional 0.3 m cable (NBN-MCSMB-03M) to
connect to a high quality coax cable.
D
A
A
L
T
A
A
R
M
NBN-MCSMB
(optional)
4
5
6
|
4
5
6
E
T
H
-
P
o
1
2
3
|
1
2
3
E
- +
MENU
CVBS
Installation Manual
DINION Housing Kit
Bosch Security Systems
Advertisement
Table of Contents
