Precor TRM 211 Quick Start Card page 53

The treadmill has adjustable rear feet. Make sure
that the running surface is level. If the treadmill is
placed on an uneven surface, adjusting the rear
feet can help, but will not compensate for
extremely uneven surfaces.
QUICKSTART.
The running belt starts automatically after a
3-second countdown appears on the display.
4. Press the SPEED up arrow key until the display
shows a speed of 3 mph (5 kph).
CAUTION: If you hear any chafing or the running belt
appears to be getting damaged, stop the running belt
immediately by pressing the red STOP key. Contact
Precor Customer Support.
5. Walk around to the rear of the unit and observe
the belt for a few minutes. The belt should be
centered on the running belt. If the belt drifts off
center, you must make adjustments (refer to
Adjusting the Running Belt).
Important: Failure to align the belt may cause the belt
to tear or fray, which is not covered by the Precor
Limited Warranty.
6. To stop the running belt, press the red STOP key.
7. Turn the treadmill Off.
48