Operations After Printing
This section describes the media cutting procedures.
Cutting Media
This section explains how to cut roll media.
8264E Cutting Media
CAUTION:
•
When printing is finished, the media guide is hot. Wait until the media guide cools off.
Follow the procedure below to cut roll media.
1. Verify the following regarding the operational condition of the printer.
•
Printing or other operations are not in progress.
•
"Ready to Print" is displayed in the control panel.
2. If the roll media cut position is changed, refer to
desired cut position.
3. Open the front cover.
No.
Name
1
Front cover
Feeding Media
and advance the roll media to the
Xerox 8254E / 8264E Color Wide Format Printer
Handling the Printer
4-97
User Guide