Important Safety Instructions - Xerox 8264E User Manual

Important Safety Instructions

This section explains general precautions that must be followed in order to use this printer safely.
Your Xerox equipment and supplies have been designed and tested to meet strict safety requirements.
These include safety agency examination, approval, and compliance with established environmental
standards.
To ensure the continued safe operation of your Xerox equipment, follow these safety guidelines at all
times.
WARNINGS:
• Always follow all warnings and instructions that are marked on or supplied with the equipment.
• Do not install the printer in the following places. Injury or damage to the printer could result.
– On an unstable stand
– On an unstable surface
– On an uneven or slanted surface
– In an area subject to vibration by other equipment
• Do not stand on or place heavy objects on the printer. Doing so may result in the printer tipping or
falling over, causing injury or damage.
• Do not cover the fresh air inlet of the printer. Doing so may result in fire.
• Do not install the printer in humid or dusty areas. Doing so may result in electrical shock or fire.
• Do not use a damaged power supply cable. Doing so may cause electric shock or fire.
• Do not connect or disconnect the power supply cable with wet hands. Doing so may cause electric
shock.
• Do not connect ground lines to the following locations:
– Gas piping. There will be a possibility of causing fire or explosion.
– Telephone ground lines and lightning rods. A large current may flow if there is a lightning strike.
– Water piping and faucets If a part of the piping is plastic, it will not serve as a ground.
• Do not store combustible materials on the platen. Doing so may result in fire.
• Do not spill flammable liquid over the platen. Doing so may result in fire.
• Do not insert or drop metal or flammable objects into the printer through openings such as a fresh
air inlet. Doing so may result in an electric shock or fire.
• If foreign substances or liquids such as water enter the printer, do not use the printer. Doing so may
result in an electric shock or fire.
– Immediately press the printer's [Power] key to turn it OFF, disconnect the power supply cable
from the building's electrical outlet, and contact your local Xerox dealer.
• Before cleaning this product, unplug the product from the electrical outlet. Always use materials
specifically designated for this product, the use of other materials may result in poor performance
and create a hazardous situation.
Xerox 8254E / 8264E Color Wide Format Printer
Safety Instructions
1-3
User Guide