Pacific energy Alderlea T5 Installation And Operating Instrictions page 5

*
Fireplace hearth requirements: (Measured without the insert)
The non-combustible fi replace hearth must be raised 2" above an adjacent combustible fl oor and extend 16" in front and 8" beyond
each side of the existing fi replace opening. A non-combustible hearth that extends a minimum 23-1/2" in front of the fi replace
opening may be fl ush to an adjacent combustible fl oor.
MINIMUM FIREPLACE
OPENING AND HEARTH
DIMENSIONS
21"
8"
** Ember protection:
Combustible fl oor in front of the fi replace insert must be protected from hot embers by non-combustible material extending
16" to the fi ring side and 8" to other sides of the unit.
Consult CAN/CSA-B365 Installation Code for Solid-Fuel-Burning appliances and equipment in Canada, and N.F.P.A. 211
Standard for chimneys, fi replaces, vents and Solid-Fuel-Burning appliances in USA.
MINIMUM EMBER
PROTECTION
DIMENSIONS
Non-combustible fi replace
hearth
Non-combustible fl oor
covering
ALT5.CPINSB 180314-24
24 1/2"
24"
Non-combustible fi replace
18 1/4"
8"
2"
23 1/2"
**
18"
hearth
*
2"
16"
18"
2"
5