Scanning In Hand-Held Mode - Motorola Symbol LS3008 Product Reference Manual

2 - 4 Symbol LS3008 Product Reference Guide

Scanning in Hand-Held Mode

Install and program the scanner (see
supplier or Motorola Enterprise Mobility Support.
To scan in hand-held mode:
Ensure all connections are secure. (See the host chapter for the scanner.)
1.
Aim the scanner at the bar code.
2.
Press the trigger.
3.
Single-Line Mode
Scanning in Hand-Held Mode
Figure 2-2
Upon successful decode, the scanner beeps and the LED turns green. (For more information about beeper
4.
and LED definitions, see
NOTE Scan line lengths vary depending on the scan line width selected (see
full scan line width is the default. Medium and short scan line widths are useful for scanning menus or
pick-lists.
Setting Up the Scanner on page
Table 2-1 and Table 2-2.)
1-3). For assistance, contact the local
Multi-Line Raster Mode
Scan Line Width on page 4-7). A