Ibm Parameter Defaults - Motorola Symbol LS3008 Product Reference Manual

8 - 2 Symbol LS3008 Product Reference Guide
NOTE Interface cables vary depending on configuration. The connectors illustrated in
only. The connectors may be different than those illustrated, but the steps to connect the scanner remain
the same.
Attach the modular connector of the IBM 46XX interface cable to the cable interface port on the scanner (see
1.
Installing the Interface Cable on page
Connect the other end of the IBM 46XX interface cable to the appropriate port on the host (typically Port 9).
2.
Select the port address by scanning the appropriate bar code from
3.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
4.
NOTE The only required configuration is the port number. Other scanner parameters are typically controlled by
the IBM system.

IBM Parameter Defaults

Table 8-1 lists the defaults for IBM host parameters. To change any option, scan the appropriate bar code(s)
provided in the Parameter Descriptions section beginning on
NOTE See
default parameters.
IBM Host Default Table
Table 8-1
IBM 468X/469X Host Parameters
Port Address
Convert Unknown to Code 39
1-3).
Appendix A, Standard Defaults
Parameter
Port Address on page
page 8-3.
for all user preferences, hosts, symbologies, and miscellaneous
Default
None Selected 8-3
Disable 8-4
Figure 8-1 are examples
8-3.
Page Number