User Preferences; Default Parameters - Motorola Symbol LS3008 Product Reference Manual

User Preferences

Default Parameters

The scanner can be reset to two types of defaults: factory defaults or custom defaults. Scan the appropriate bar
code below to reset the scanner to its default settings and/or set the scanner's current settings as the custom
default.
•
Restore Defaults
• If custom default values were configured (see
for all parameters each time the
• If no custom default values were configured, the factory default values are set for all parameters each time
the
Restore Defaults
page A-1.)
•
Set Factory Defaults
set the scanner to factory default values. (For factory default values, see
•
Write to Custom Defaults
parameters. After changing all parameters to the desired default values, scan the
bar code below to configure custom defaults.
*
Write to Custom Defaults
- Resets all default parameters as follows:
Restore Defaults
bar code below is scanned. (For factory default values, see
- Scan the
Set Factory Defaults
- Custom default parameters can be configured to set unique default values for all
Restore Defaults
), the custom default values are set
Write to Custom Defaults
bar code below is scanned.
bar code below to eliminate all custom default values and
Table A-1
Set Factory Defaults
User Preferences 4 - 3
Table A-1 beginning on
beginning on page A-1.)
Write to Custom Defaults