5 - 10 Symbol LS3008 Product Reference Guide
Function Key Mapping
ASCII values under 32 are normally sent as control key sequences (see
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
Enable Function Key Mapping
FN1 Substitution
When enabled, the scanner replaces FN1 characters in an EAN128 bar code with a keystroke chosen by the user
(see
FN1 Substitution Values on page
Enable FN1 Substitution
13-6).
Table 5-2 on page
*
Disable Function Key Mapping
*Disable FN1 Substitution
5-13). When this