USB Keyboard FN 1 Substitution
This option applies only to the USB HID Keyboard Emulation device. When enabled, this allows replacement of
any FN 1 characters in an EAN 128 bar code with a Key Category and value chosen by the user (see
Substitution Values on page 13-6
Enable FN1 Substitution
Function Key Mapping
ASCII values under 32 are normally sent as a control-key sequences (see
parameter is enabled, the keys in bold are sent in place of the standard key mapping. Table entries that do not
have a bold entry remain the same whether or not this parameter is enabled.
*Disable Function Key Mapping
to set the Key Category and Key Value).
USB Interface
*
Disable FN1 Substitution
Table 7-2 on page
Enable Function Key Mapping
7 - 9
FN1
7-11). When this