SOLTEK SL-65DVB User Manual page 58

65DVB/65DV2
TX, RX inverting
Onboard Parallel Port This item allows you to determine onboard parallel
0nboard Parallel Port
ECP Mode Use DMA Select a DMA channel for the parallel port for use
Parallel Port EPP Type Select EPP port type 1.7 or 1.9
Onboard Legacy Audio This field controls the onboard audio.
3. Press <ESC> to return to the Main Menu when you finish setting up all
items.
58
This item allows you to enable the TX, RX inverting
enabled which depends on different H/W requirement. This
field is not recommended to change its default set-
ting for avoiding any error in your system.
The choice: "No, No", "No, Yes", "Yes, No", "Yes, Yes".
port controller I/O address setting.
The choice: 378H/IRQ7, 278H/IRQ5, 3BC/IRQ7,
Select an operating mode for the onboard parallel
Mode (printer) port. Select Normal, Compatible, or SPP
unless you are certain your hardware and software
both support one of the other available modes.
The choice: SPP, EPP, ECP, ECP + EPP.
during ECP mode.
The choice: 3, 1.
The choice: EPP1.7, 1.9.
• Sound Blaster
• SB I/O Base Address
• SB IRQ Select
• SB DMA Select
• MPU-401
• MPU-401 I/O Address
• Game Port (200-207H)
Disabled.