Table of Contents
Advertisement
ID/TITLE Setup Procedure
With the cursor located at DATA SET, press the D button. The cursor moves to the ID data set
position an the first character flashes.
Using the L, R, U and D buttons, select an input character.
Press the SET UP button, and the selected character will be entered. (The cursor will then move
to the next character position.)
In the same manner, repeat the above steps
On completion of character input, bring the cursor to RET using the L, R, U or D button. Then,
press the SET UP button.
The cursor is returned to DATA SET.
To quit the SPECIAL SET mode, press the SET UP button.
Flashing shifts one character toward the left.
Flashing shifts one character toward the right.
Flashing character is deleted, and the subsequent character string is shifted left.
DEL
A space is inserted at the flashing character position, and the subsequent character string is
INS
shifted right.
The cursor is returned to DATA SET.
RET
13. (FILE) TITLE
Menu for setting the scene file name.
1) File-1: Set File-1 title.
2) File-2: Set File-2 title.
3) File-3: Set File-3 title.
Setting procedure
1) Select input characters with the L, R, U and D buttons.
2) Press the Setup button to decide a character. The cursor shifts to the next character position.
3) In the same manner, set the titles for Files 2 and 3.
4) After completing character input, shift the cursor to RET with the L, R, U and D buttons, and press
Setup. The cursor shifts to (File) Title.
5) Press the Setup button to exit the Special set mode.
: Move 1 character toward left. The selected character flashes.
: Move 1 character toward right. The selected character flashes.
DEL: Delete flashing character and close vacated space.
INS:
Insert a space at the flashing character position and shift subsequent characters toward the right.
RET: Shift cursor to (File) Title.
14. DTL
Menu for setting detail parameters
LEVEL DEP Dependent level setting
Detail amount, and noise, can be reduced in scene dark components.
Setting range is -128 to +127. Press the R button to increase the value, reduce the detail amount
and
to enter an ID code and TITLE.
17
Advertisement
Table of Contents
