Black Adj; Special Set - Hitachi HV-D27 Operation Manual

BLACK ADJ

1) Auto black: Automatic black balance adjustment
Press the R button to activate automatic adjustment. See page 26.
2) Dark Shad: Automatic dark shading adjustment
Press the R button to activate automatic adjustment. See page 26.

SPECIAL SET

REMOTE Remote control baud rate setting
For baud rate setting, use the L and R buttons.
(Note) When setting a baud rate, do not connect the communication cable with the REMOTE terminal.
62500bps Select this baud rate when using the RC-C10 remote control box. In this case, be sure
to also set the RC-C10 baud rate to 65200 bps.
instructions.
19200bps, 9600bps, 4800bps
LENS Change to LENS menu.
IRIS GATE Change to IRIS GATE menu.
WHITE GATE Change to WHITE GATE menu.
LEVEL Change to LEVEL menu.
MASKING Change to Masking menu.
OUTPUT/SYNC Change to OUTPUT/SYNC menu.
ID/TITLE Change to ID/TITLE menu.
DTL Change to DTL menu.
12
Select any one of these baud rates when controlling the camera from
a personal computer through RS-232C interfacing.
refer to 'Function Selection by Internal Switch Setting'. Contact us
for details of the control procedure using a personal computer.
Technical documents including protocol data will be supplied.
Refer to the RC-C10 operating
For details,