Skin Tone Adjustment - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

4-18. Skin Tone Adjustment

Note
. Perform this adjustment, if necessary, to suit the custom-
er's preferences.
Preparation
. On the setup menu, set as follows.
PAGE : E20*LEVEL 3
: SKIN TONE DETAIL → ON
ITEM
: SKIN TONE IND. → ON
ITEM
. Shoot a person's face.
Adjustment Procedure
Equipment : Any of color monitor, viewfinder or
waveform/vector monitor.
Test point : TEST OUT or VIDEO OUT connector
1. Shoot a person's face in the central of the viewfinder.
2. On the setup menu, set as follows.
PAGE : E20*LEVEL 3
: SKIN TONE DET. → ?EXEC
ITEM
3. Push the rotary encoder.
(The detection area is displayed in a zebra pattern.)
4. Perform the adjustment in this step, if neccessary.
On the setup menu, adjust as follows.
PAGE : E20*LEVEL 2
ITEM : SATURATION
(Component in the saturation direction)
HUE (Hue)
WIDTH
(Component in the hue direction)
R-Y
HUE
WIDTH
SATURATION
The skin detail detection area is displayed in a zebra
pattern.
Adjust so that zebra pattern displays only proper area.
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1
5. On the setup menu, adjust as follows.
PAGE
ITEM
Spec.
Setting After Adjustment
. On the setup menu, set as follows.
PAGE
ITEM
ITEM
ITEM
B-Y
4-18. Skin Tone Adjustment
: E20*LEVEL 3
: SUPPRESS LEVEL (Factory setting: 0)
: Set the level to the desired detail level.
: E20*LEVEL 3
: SKIN TONE DETAIL → OFF
: SKIN TONE IND. → OFF
: SKIN TONE DET. → OFF
4-17