Inserting The Cassette Tape With Outside Panel Removed; Cleaning When The Heads Are Clogged - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

1-12. Inserting the Cassette Tape With
Outside Panel Removed
1. Put the cassette compartment into the up position.
(Refer to Section 1-8.)
2. Insert the cassette tape into the cassette compartment.
3. Insert a screwdriver blade into the hole of the cassette
compartment, and then slide it in the direction of the
arrow until it locks to put the cassette compartment
into the down position.
n
To avoid deformation of the lid arm (L), never press the lid
arm (L) to put the cassette compartment into the down
position.
If the lid arm (L) is deformed, the front lid will not be
locked when installing the outside panel.
Lid arm (L)
(Do not use now.)
Hole
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1
Screwdriver
Cassette compartment

1-12. Inserting the Cassette Tape With Outside Panel Removed

1-13. Cleaning When the Heads are Clogged

1-13. Cleaning When the Heads are
Clogged
If the video heads are clogged, firstly clean them with a
cleaning tape as following "Cleaning by a Cleaning Tape".
If it does not help, see Section "6. Cleaning" and clean
them with a cleaning cloth.
Cleaning by a Cleaning Tape
Tool
. Cleaning Tape BCT-D12CL
n
Be sure to use the cleaning tape BCT-D12CL.
The use of other cleaning tape may cause unusual wearing
or damage of the video heads.
1. Insert the cleaning tape BCT-D12CL into the unit.
2. Press the PLAY button to start the head cleaning.
3. After the five seconds, press the EJECT button to eject
the cleaning tape.
n
To avoid damage to the video heads, be sure to take
the cleaning tape out after cleaning.
4. Check to see that the head clog is clear.
1-27