Displaying The Servo Adjustment Data - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

2-4. Displaying the Servo Adjustment Data

The servo adjustment data can be displayed, using the VTR menu of the unit. (It can not be displayed on
the DIAG menu.)
Refer to Section "3-2. VTR (DIAG) menu" for details of the VTR menu. Display the servo adjustment
data as follows.
1. Select the page VTR MENU-13 of the VTR menu.
VF screen
VTR MENU-13
SERVO MEMORY
1. CAP FREE SP XX
2. PG PHASE-1
XX
3. PG PHASE-2
XX
4. CFGA DUTY
XX
5. CFGB DUTY
XX
6. EDIT DELAY
XX
7. SLACK
XXXX XXXX XXXX XXXX
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1
1. Displays the capstan free speed adjustment data
2. Displays the low-order bit of drum PG phase adjustment data
3. Displays the high-order bit of drum PG phase adjustment data
If the most significant bit is "0" in binary, the PG phase adjustment
data including high and low-order bits ranges from 0 to 255. if it is
"1", the PG phase adjustment data range from 256 to 511
4. Displays the capstan FGA offset adjustment data
5. Displays the capstan FGB offset adjustment data
6. Displays the delay adjustment data during back-space editing
7. Slack information (Refer to Section 2-5.)
2-4. Displaying the Servo Adjustment Data
2-3