Bkdw-704 (Fm-65 Board) - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

9-3. BKDW-704 (FM-65 board)

9-3. BKDW-704 (FM-65 board)
The BKDW-704 is the dedicated optional board for DVW-
790WS/790WSP/709WS/709WSP.
(Even when the BKDW-704 board is installed in the
DVW-707/707P, image inversion function is not usable.)
Install the BKDW-704 in exchange of the BF-74 board that
is attached on the DCP-17 board.
Procedure
1. Open the inside panel. (Refer to Section 1-7.)
2. Remove the DCP board assembly (Refer to Section 1-9.)
3. Remove the precision screw, and then remove the BF-
74 board from the DCP-17 board.
DCP-17 board
4. Connect the BKDW-704 (FM-65 board) onto CN16 on
the DCP-17 board, and fix it with the precision screw
that is removed in step 3.
5. Remove the one precision screw from the AD-155 board.
AD-155 board
CN16
9-4
BF-74 board
Precision
P 1.4x3.5
Inside panel
BKDW-704
(FM-65 board)
Precision
P 1.4x3.5
6. Set the supplied bracket (FM) between the BKDW-
704 and the AD-155 board as shown in the figure. And
then fix it with the supplied precision screw and the
precision screw that is removed in step 5.
Bracket (FM)
(supplied accessory)
AD-155 board
Precision P1.4x3.5
7. Reinstall the DCP board assembly.
(Refer to Section 1-9.)
8. Close the inside panel, and then fasten the four screws
(with drop-safe) to install the panel.
n
Be careful not to pinch harnesses between the inside
panel and chassis.
BKDW-704
Precision P1.4x3.5
(supplied accessory)
DVW-790WS/709WS/707
DVW-790WSP/709WSP/707P P1