Switch/Slit Land Settings And Led Functions On The Boards; Board - Sony DIGITAL BETACAM DVW-707 Maintenance Manual

1-10. Switch/Slit Land Settings and LED Functions on the Boards

1-10. Switch/Slit Land Settings and LED Functions on the Boards
As for the external-switch settings, see Section "2. Locations and Functions of the Parts and Controls" in
the Operation Manual.
n
Never change the settings of switches specified "Factory use".
1-10-1. AXM-21 Board
Slit Lands
Ref. No. Name
SL300 AUDIO OUT Select
SL301 AUDIO OUT Select
*1 : If the AUDIO OUT connector (XLR 5-pin) is converted to XLR 3-pin connectors, set the slit lands as specified above. (The XLR 3-pin
connectors are not supplied. Ready them separately.)
*2 : This slit land is short-circuited by the traces on the board. Therefore, the traces must be cut using a knife when the setting is
changed.
1-18
SL301
SL300
AXM-21 B side
Description
OPEN : Output from the XLR 5-pin connector
SHORT : Output from the XLR 3-pin connector
OPEN : Output from the XLR 3-pin connector
SHORT : Output from the XLR 5-pin connector
Factory setting
OPEN
*1
*1 SHORT *2
DVW-790WSP/709WSP/707P P1
DVW-790WS/709WS/707